HealthPro02 uses advancements in scientific laboratory
technology to make a Home Air Quality Test kit that's Patented + Easy + Reliable
  
Get the test used by hundreds of
scientific companies now available for home use. Over 10 years of research and testing to
develop our patented pectin medium.
Our Test Kit Technology
HealthProO2
is air testing made simple for home use. With our Leading Edge, simplified
technology, performing your indoor air quality testing will seem almost effortless and
give you the accurate results that you require using a special pectin
gel and plastic transparent petri dish and cover. Our patented technology, which
uses an exclusive pectin medium, has taken almost 10 years to develop by Micrology
Laboratories, LLC. The pectin gel culture media provides temperature independent results
and is trademarked as Redigel® and Easygel® . The HealthProO2
pectin gel is formulated as a liquid, which is poured into the provided petri dishes where
it solidifies and is virtually indistinguishable from a standard prepoured petri dish used
in lab tests.
PharmaTropic Labs has utilized the Easygel® technology*** in
designing it's simple to use home air test kit for either free standing air exposure or
swab testing of specific surfaces. Each HealthProO2 air test kits makes for inexpensive
"before and after" tests and no additional equipment or materials are needed. It is the best medium for accurate and effective colony growths
of identifiable air born contaminents. Anyone can
run this simple air sampling test and visually identify the results in 48-60 hours.
Now with HealthProO2 you can perform air quality testing
in your own home without having to pay 3rd party lab costs. Imagine doing your air quality
testing in-house, without the need for a Science degree. Easily identify molds, yeasts
& bacteria all, in one test kit. HealthProO2 indoor air test allows you two different
means of collection sampling for molds, bacteria and yeasts, in one simple to use test
kit.
- Pour Plate test ... just pour pectin gel into petri dish and replace dish lid. Swirl
liquid to cover the dish bottom evenly and it will gel. Then expose collection medium to
room air for one hour. Cover and scotch tape collection dish and place in warm darken area
for 3-5 days (closet shelf or dresser drawer is ideal). View results and compare with photos and test results tips on this page.
- HVAC vent output testing is done the same way but only
expose culture gel dish to air vent air for 1 minute. Cover and place in darken area.
- Swab Plate test.... Take 2 sterile cotton Q-tip swabs and be sure not to touch testing
side tips. Dip Q- tips in pectin liquid Easygel®
bottle and squeeze off excess on side of bottle. Swab a small section of suspect room
surfaces, HVAC vent louvers, bathroom tile or surface that collects air born dust.
Immediately place Q-Tips inside Easygel® bottle
and stir. If need be rub bottle sides to remove swab surface contaminants. The pour bottle
contetns into a petri dish and cover as above for 3-5 days.
Using our patented pectin gel medium, you can test your
air for molds, bacteria & yeasts. With our easy two step instructions you can identify
the Hot Spots or high contamination areas in your home without sending out the collection
samples for expensive labs testing.
HealthProO2
the all-in-one test kit that is used by scientists
the world over is available now for home use. Indoor air testing is becoming more popular
due to higher; pollution levels, pollen counts and consumer awareness of potential threats
to the respiratory system through the air that we breathe. Protect your health and find
out what you're breathing that could pose a threat to you and your family. Forget
about the need for expensive lab fees, sample taking consultants and shipping costs. You
get to see your home's IAQ results in just 48 hours without expensive lab fees.
*** Easygel ® is the current trademark for the pectin
gel culture method sold by Micrology Laboratories LLC, and is the same technology
originally offered by RCR Scientific Inc. under the trademark Redigel ®
. Therefore, literature and specifications for these two trademarks are
interchangeable.
 
Because of increasing energy costs, Americans today are sealing their homes
and buildings with better windows, insulation, and moldings. When homes and other
buildings are sealed, contaminants can build up, such as mold. As air passes through the
home, the mold - along with chemicals given off by paints, cleaners, glues, particle board
furniture, pesticides, and of course, cigarette smoke - is picked up and circulated
throughout the structure without ever being "cleaned. "
According to the World Health Organization, 40% of all buildings are a serious
hazard to our health because of their sealed in polluted air.
Symptoms caused by indoor air pollutants can include:
 |
Eye and skin and lung irritation -
Nose and throat discomfort -Fatigue
Unpleasantness from offensive odors -
|
|
Did you know: U.S. EPA studies
indicate that indoor levels of air pollutants may be 2-5 times higher than outdoor levels.
|
|
Indoor pollutant levels can reach
100 times that of outdoor levels when we effectively "seal" our houses even
tighter from the elements during winter months.
|
|
High levels of indoor air pollutants
may be of particular concern because most people spend up to 90% of their time indoors.
|
Molds, fungus, bacteria, yeasts, allergens and volatile organic
compounds (VOCs) are just a few of the contaminants that are unknowingly looming within
the walls of your home. Why are they there? Where did they come from? The bottom line is,
they are not that easy to find and even harder to remove, if noticed at all. They all
spread throughout your home space via your HVAC system.
Contaminants that have a negative affect on your health can be
generated through a variety of different means; some
are due to irregularities within your home structure or environment, and others can are
actually self-inflicted. It is a known fact that molds, fungus, yeast, and bacteria can be
propagated through wet and high humidity areas that are kept dark throughout the home.
Leaking basements, walls, and floors are a spawning ground for such contaminants that
start out as locally bred in a confined space and then travel throughout the home by means
of air flow. They most likely will become part of an indoor air pollution problem
throughout your entire home that if not taken care of can only get worse. A few examples
of self-inflicted contaminations would be cigar or cigarette smoke, cat litter boxes, pet
dander, or other animal infestations. Each home has its own particular variety of
unsightly inhabitants, and no two homes are identical.
In order to do combat with these air born contaminants, you first
need to know which variety you are fighting. Another important factor is finding out where
the concentrations may be higher within your home, such as which room or space. Perhaps
the mere suggestion of testing your home’s air may be prudent at this stage. Click to purchase the HealthPro 02 home air quality test kit for $16.99
with Free Freight.
Regenerating Your Environment is Healthy Choice you can control.
Purchase a proven air purifier system and perform
before/after air quality testing.
** Pros over
competition: Low cost, no yearly maintenance, just plug-in installation, airborne
hydro peroxides, super oxide ions and hydroxide ions travel throughout the house providing
24-hour protection against airborne mold, bacteria, viruses, odors and VOC’s. The
NanoO2 cell also acts as a HE/UVC germicidal lamp and treats the air that passes directly
by it. The UV lamp in the NanoO2 chamber combines with naturally occurring water vapor to
form Hydroxyl Radicals (OH, unstable molecules stripped of hydrogen and oxygen atoms).
Our Hydroxyls attack airborne pollutants that include viruses, bacteria, germs,
odors, and chemical gases (VOCs). The Pollutants are destroyed in the process, while the
Hydroxyl ions reform into water vapor (H2O) or other harmless air molecules. The
NanoO2™ produces no harmful by-products as it emulates the way nature cleans the air.
Many air purifiers that have been sold,
and are still available today, have been shown to produce dangerously high levels of
ozone. New air quality study reports are revealing the negative side effects of direct
ozone exposure. Get the advantage of safer ion Oxidation cleaning and nanotechnology with
the NANO O2™ UV air purifier system. We set out to market
a safe residential air purifier that could produce safe, low concentrations of ozone that
would not exceed the .04 ppm Federal limits. This was accomplished in the early 1990's,
about the same time as the Federal Government was going after the ozone blasting
residential units that exceeded this standard. This battle of the Feds and air purifier
manufacturers, like Sharper Image's Ionic Breeze, gave ozone a very bad name.
With
the Nano metalic coating technology to build a device that produces safe, low
concentrations of ozone and the ability to ensure a room would not exceed .04 ppm, it was
time to set out to validate the use of this device on mold, VOC's, odors and bacterial.
Particle size has been the only limiting factor to silver, titanium and other base metals
effectiveness as an anti-bacterial agent. Now through nano-technology, a rapidly growing
science of producing and utilizing particles that measure in nanometers (1 billionth of a
meter), silver, Titanium oxides can be used efficiently as an antimicrobial in medicines,
air filters, clothing and personal hygiene products. Fox TV News was doing a three-part
series on indoor air problems and tested one of the older name brand of excessive ozone
producing units. The purifier they had tested was producing 18 ppm ozone, a lethal amount
that drove the camera crew and news reporter right out of the office. The Fox people then
asked if they could independently test the PCO technology used in the original NanoO2 air
purifier. They ran tests supervised by an independent air specialist and two medical
doctors. The series turned out to be a fantastic infomercial for this technology. The
results couldn't have been better. Fox ran this on their national news network and their
national health news. Popular Science picked up the story for their magazine and ran it on
the Popular Science TV Show.
The
original NANO O2™ PCO Cell was designed for use
in a central HVAC system. This provides the fastest and most effective oxidizer
distribution. Rhodium, Titanium, Silver and other metallic coatings were added as a
catalyst to emit cleaning bacteria destroying ions. Then improved hydration compounds were
also added to increase hydrogen content and a total new bulb target concept was used. A
360 degree cell provided maximum exposure of the catalysts. The UC-C bulb was reworked
into a HE/UV Broad Spectrum 100-3-NM bulb with a heavy duty filament was developed. This
combined with a soft start ballast gave the new NanoO2 Cell an unprecedented 3 year,
25,000 hour life. This was a major improvement over the current standard 8,000-10,000 hour
UV bulb life. The most important improvement was the efficacy, the new NanoO2 cell design
created more hydro peroxides, super oxide ions while bringing down ozone levels to only
.01-.015 ppm (less then half the federal max safe levels). Country or forest air is
usually around .01-.02 ppm of ozone. |
The NanoO2 air
purification units do not require noisy high speed fans in order to clean the air in
your home or office. The fans utilized in our units simply push the five air cleaning ions
created into the air, which then radiate through your entire home constantly destroying
air borne and surface contaminants. Since the hydrioxide ions are present in your air 24/7
the air is constantly being cleaned without have to pass directly through the unit to
sanitize your home air. This makes our units extremely effective yet extremely compact in
size so they can fit easily on and tabletop surface. Learn how these air purifier units
incorporate the top 3 technologies for purifying your home environment into one cost effective air filtration system.... CLICK HERE. |
